S/R Chassis Rear Knuckle Reinforcement Weld In Kit #2POT-BRKT 5 degrees of camber and

5 degrees of camber and as high as +1 degrees on a low car

To help guide installation and ensure that the bracket is welded on true we do include a bolt on guide as shown in the photos

The front lines are also longer to compensate for big brake setups or cars with more steering lock (which you would see stretching with the factory line)

9) Bump steer correction is altered through the use of 5mm shims

BJ274 OEM style replacement ball joint

S/R Chassis Rear Knuckle Reinforcement Weld In Kit #2POT-BRKT 5 degrees of camber andThe GKTECH S R chassis rear knuckle reinforcement plates have been designed to brace the OEM rear knuckles where it needs it. If you've been drifting these cars for a while now, you would have seen the OEM cast knuckles break off on the balljoint mount and the toe arm mount, usually happening in spectacular fashion. We've made reinforcement easier than ever with our laser cut, pre folded, ready to weld in plates. This is considered a must do