1" Check Valve Low Pressure Use Stainless Steel Spring CV100 GENERAL PUMP ***All fittings should be installed

***All fittings should be installed using non-drying liquid Teflon such as rector seal t plus 2 (can be purchased at any hardware store in the plumbing section) never use Teflon tape on anything in these related industries

install a 3/8" air valve into a 3/8" All-Flo on YouTube

Recommend a 1000 MCA 800 CCA marine type battery and battery box to charge extremely frequently or buy a 115 volt unit if not adequately charged

This unit is available in skid or portable cart for the same cost

ceramic plungers

1" Check Valve Low Pressure Use Stainless Steel Spring CV100 GENERAL PUMP ***All fittings should be installed1" Check Valve Low Pressure Use Stainless Steel Spring CV100 1 PSI Crack Pressure EPDM gasket Polypropylene composition (glass reinforced) Made in the USA Be very careful when installing check valves. Overtightening will crack check valves. Use a slotted filter (TF 12 or TF 16) on the inlet to prevent clogging the check valve.