Simpson MCR05012 Carbide Tipped Rebar Cutter 1/2 in. x 12 in. Drilling Depth 15 in. Overall Length Screwdriver Motors The HUC310 is designed for

The HUC310 is designed for joists that are 2-1/2 inches wide and between 9-1/4 and 9-1/2 inches in depth

Why is ZMAX galvanization recommended for this connector

The hot-dip galvanized (HDG) finish on the HD3BHDG provides extra corrosion resistance

CCOQ - Column Cap Only for field-welding to pipe or other columns (no straps

MPN: ABU46SS

Simpson MCR05012 Carbide Tipped Rebar Cutter 1/2 in. x 12 in. Drilling Depth 15 in. Overall Length Screwdriver Motors The HUC310 is designed forThe Simpson MCR05012 1 2 in. x 15 in. Rebar Cutter is a carbide tipped rebar cutting bit from Simpson Strong Tie, engineered to resolve conflicts between hole placement and embedded rebar or wire mesh. When drilling location intersects with rebar or wire mesh, this bit enables the rebar to be removed so the hole can be drilled to the proper depth keeping projects on schedule and on spec. Key Features A shank adaptor designed for the rotohammer in use